Joist Hanger - Type S (Standard) - 50 x 200mm

Name: KH Fixings
Address: 27 Bridge Street, Ellon, Aberdeenshire, AB41 9AA, GB
Telephone: 01358 725111
Price range: £

Pay now or pay in instalments with

A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls.
The standard hanger is designed for building into brickwork or blockwork.
Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardised square twist nails.
Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm2 and above.
As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346:2009 + G275, independently tested and compliant with BS EN 845-1 and to the requirements of BS5268.

A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls
The standard hanger is designed for building into brickwork or blockwork
Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists
All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardised square twist nails
Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm2 and above
As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346:2009 + G275, independently tested and compliant with BS EN 845-1 and to the requirements of BS5268